Specialism
Project type
Insights
Tools

9 essential factors to consider when building an eco home [2024 UK edition]

Reducing greenhouse emissions from both the construction and daily use of homes is crucial - here are our best tips for designing and building a sustainable house

5 January 2024
5 minutes read
Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies

Wouldn’t it be great if you would design and build an eco home that visually appealing and has a low energy use?

As you probably already know, both the construction industry and homeowners increasingly recognise the necessity for sustainable homes in the face of a changing climate. Designing new builds, retrofitting homes and improving existing housing stock are all essential steps.

With the technology available today, it is possible to increase the energy efficiency of new buildings and renovations without compromising on the aesthetics, safety, health or thermal comfort of a building’s occupants. To achieve an energy-efficient building requires that energy conservation be a fundamental part of eco house design.

Do you want to learn how to build an eco-friendly home?

If you follow the best practices listed in this blog post, you'll be well on your way to building your eco house that is visually appealing and has a low energy demand from the start. Let’s take a closer look at how to design and build a low-energy, eco-friendly house with the latest Passivhaus design and sustainable design ideas.

Graph of various shades of blue demonstrating the cost efficiency of having an energy efficient home such as an eco house, passivhaus or zero carbon house in comparison to the traditional old building energy uses

1. Best Passivhaus design and construction strategies

First of all, Passivhaus design is a standard for design and construction that aims to create a home that stays at a comfortable temperature with minimal energy use. Sunlight, human and appliance-generated heat are used to dramatically decrease the need for additional space heating.

In Passivhaus design, the size, shape and orientation of a home, good heat retention, airtightness, natural ventilation and heat-recovery systems are all employed with the aim of dramatically reducing the annual carbon emissions of a building.

Here’s the point: to achieve the Passivhaus standard, the energy required for space heating must not exceed 15 kWh/m2 . This is determined by calculating the maximum amount of heat that can be delivered using the fresh supply of air at the minimum required ventilation rate. So what does it all mean?

Achieving this standard depends largely on the climatic condition of the region in which it is built. In the UK, this typically involves:

  • ensuring very high levels of insulation;
  • the installation of extremely high-performance windows with insulated frames;
  • an airtight building fabric;
  • ]"thermal bridge free" construction;
  • a mechanical ventilation system with highly efficient heat recovery;
  • and accurate design using the Passive House Planning Package (PHPP).
Smart architectural design example of how passive solar design can be incorporated in proposed drawings to harness heat and light of the sun resulting in a decrease demande on energy in the home

2. Passive solar design requirements for sustainable homes

The good news is you don’t have to commit to the Passivhaus standard to understand and utilise passive sources of energy. Most people are familiar with active solar energy generation – solar panels are a common sight up and down the UK and help to reduce our dependence on polluting fossil fuels.

Fewer people understand the necessity of passive solar design, which allows us to more directly harness the heat and light of the sun to reduce the energy demands of our homes.

One of the most important elements of passive solar design is building orientation.

Let me explain...

If you are in the northern hemisphere, new buildings, wherever possible, should be orientated so that they face south. Windows should be placed predominantly on the south side of a building to maximise solar gain.  While, of course, the orientation of existing housing stock can rarely be changed, retrofitting measures may still include an increase of good quality, thermally-efficient triple glazing to the south side of the structure.

Seasonal shading should also be considered, however, to prevent overheating in summer. This can often be easily achieved by the use of such features as extended eaves and well-positioned blinds, which will reduce high-angle sun penetration without significantly disrupting levels of natural light. Think I’m exaggerating?

3. Thermal efficiency, insulation and U values for eco friendly house design

Have you wondered what U Value means?

The design of any building involves careful consideration not only of the external factors of a site but also, of course, of the materials of which it is made. Sustainable home design should first consider the carbon cost of materials, before going on to develop designs whereby those materials can be used to create homes that keep the heat in and require little energy to heat.

Let’s dig a little deeper...

For example, eco-friendly materials such as wood from sustainable forestry, cob and straw can all be used as alternatives to other, more carbon-costly materials in green buildings, including those which aim for Passivhaus standards.

The U value of walls, the roof and floors determines the rate at which heat escapes from a building. The lower the U value, the more slowly heat will dissipate. Passivhaus standards require U values to be no higher than 0.15 W/m2 for the walls, roof and floors and 0.80 W/m2 for an individual window, 0.85W/m2 for windows fully installed. In many cases, the U values should be far lower and these are considered to be the maximum acceptable U values. (In some cases, higher than will be acceptable for building standards).

If you are retrofitting energy-efficient measures, external insulation may be best since external insulation does not prevent wall structures from providing thermal mass (which helps to store the sun’s heat and release it gently at night). This can also help minimise thermal bridges that result in heat loss.

Example of smart airtight design on two levels showcasing the heat transfer from the sun, geothermal loop and cool air circulation

4. Clever airtight design for eco homes

Another important element in the design of energy-efficient houses is that they must have very good airtightness levels. An airtight building will further reduce heating demand and can be achieved by means of barriers and membranes placed in all the elements of the building.

In Passivhaus certification, the airtightness achieved by a structure is determined by an n50 test measurement. Air pressurisation tests are performed and the air escaping at 50 Pascals pressure should be fewer than 0.6 air changes per hour. Good design and implementation of barriers are essential to meet the rigorous standards.

5. Smart natural ventilation and heat recovery systems for eco houses

When implementing airtightness, it is also important to consider the ventilation needs of a structure. Natural ventilation allows for a cooling of excess temperature and a healthy and comfortable airflow by means of cross ventilation, which can be achieved by understanding the way that air moves through a building.

The simple truth is that it is a requirement of Passivhaus certification that a building does not experience temperatures higher than 25 degrees Celsius for more than 10% of the year. In summer, natural ventilation can play a part in the maintenance of a low-energy building, though in the winter, natural ventilation can result in undesirable heat loss.

Most importantly, in order to reduce heat losses further and yet maintain indoor air quality, airtight designs often incorporate mechanical ventilation with heat recovery (MVHR) into the designs. These systems work by extracting air from warm, wet rooms such as bathrooms and kitchens and passing it through a heat exchanger that passes this warmth to fresh air coming from outside. Fresh, pre-warmed air can then be released back into living areas of the home.

For Passivhaus certification, the heat recovery efficiency of a ventilation system must be equal to or greater than 75%. A fan power of less than or equal to 0.45 Wh/m3 is required and thought should also be carefully given to potential noise pollution and sound transfer between rooms.

6. Energy use and energy efficiency of eco homes

Good insulation and solar orientation will help create a home that has a low heat-energy demand to start with, but homeowners must also take other measures to reduce energy usage. Choose appliances with A+++ rating and opt for highly efficient lighting (such as LED).

Here’s the big idea: it may also be worth looking to photovoltaics and other means of local energy generation to meet the low electricity requirements of the home. Active solar measures can be taken to reduce the energy load of heating water by pre-heating. Hot water heating systems and heat losses incurred through their implementation can be the Achilles heel of eco and Passivhaus design if not carefully considered at an early stage in the process.

7. Best water, drainage and waste management practices for eco houses

Something that will surprise some people is that one of the major considerations for green home design should be the use and management of water. Many eco designs will incorporate water-saving measures such as low-flush plumbing and water recycling. Reuse of greywater and even the treatment of waste water in reed beds or other natural filtration systems is recommended where possible.

Alternatively, sustainable homes may also incorporate composting toilets and other alternative waste management options. If you are opting for the Passivhaus standard, regulations mean that immense care must be taken over ingress and egress points for any pipes and the heat that can be lost as a result of the installation of certain water systems. Do you see where we’re going with this?

Waste management considerations also extend to the general household waste that will be generated within a home. A zero-waste home should aim for as much of a reduction in generated waste as possible and allow for as much on-site recycling, composting and reclamation of waste materials as possible.

Waste should also be considered through the construction or renovation phase. In sustainable building and renovation, as much waste as possible should be kept from landfill. Of course, reclaimed materials should also be used where it is a good idea to do so. There should also be consideration of the eventual disposal of materials used at the end of the life of the building.

8. Suitability, liveability and adaptability for eco homes

A truly sustainable dwelling house is one which is ideally suited to its situation and to those living in it. I’ll walk you through the whole process...

First of all, in order to ensure that a home’s design is optimised to reduce energy consumption and ensure year-round comfort, a bioclimatic chart can be used to make sure that the designs are perfect for the climate conditions of the area. Such a chart can also be used to determine the measures that are best employed with a given house to add value and reduce its current energy use.

Designers may also employ vector diagrams to determine the sunlight strength and direction at a given time of day and time of year and to consider other elements such as wind direction and strength, the effects of which can be mitigated with good design.

Quite simply, liveability is also key to good sustainable home design. Passivhaus regulations take into account the comfort levels required for healthy living when it comes to heat and airflow. Light levels are also good in a home with passive solar design features, as much thought is given to how rooms within the home are to be used and how they will relate to one another.

Let me give you some examples:

Main living spaces such as living rooms and dining rooms will take advantage of the glazing to the south, while the less-glazed north side of a passive home will often be given over to rooms where light is less important, such as bathrooms, utility rooms and storage space.

Beyond that, adaptability is another factor in sustainable home design. Sustainable homes must be built to be adaptable to many different eventualities. This adaptability is especially crucial in the face of our warming planet and changing weather patterns that make forecasting much more difficult. By being largely self-contained and requiring little external power to operate successfully, a home with other sustainable and environmentally friendly features, can weather the storms, literally and metaphorically.

9. Relationship of an eco house to its environment

Those who design ethical and environmentally friendly housing must consider far more than just the energy use of each building. In sustainable home design, it is important to remember that no building exists in a vacuum and it is important to consider any home in the context of its environment. It sounds simple. But it isn’t...

A truly zero-carbon home would facilitate the goal of a zero-carbon lifestyle. This could include such features as growing space for food; bicycle storage space and perhaps features such as workshops or home offices that make it easier to work flexibly from home. Even in a city or high-density area, provision can be made for food production through green roofs, vertical gardens and space for container growing. Such features can also be incorporated into insulation plans.

A successful sustainable design for a home with a garden will allow for easy transition between the two and a blurring of the boundaries between inside and out by incorporating features such as verandas and conservatories – both features which can be helpful in different ways for passive solar design.

How Urbanist Architecture can help you build your eco home

The design of a zero-carbon house begins with the materials, but it ends with a thorough understanding of those who will one day call it home and how it will feel for them to live there.

With a multidisciplinary team comprised of architects, planning consultants, and interior designers, Urbanist Architecture is more than equipped to help you build your sustainable house. Take action by getting in touch with us today.

Sky Moore-Clube, Architectural Designer at Urbanist Architecture
AUTHOR

Sky Moore-Clube

A key member of our architectural team, Sky has a passion for heritage homes and interior design, as well as a great instinct for ultra-creative extensions. Sky brings a fresh yet thorough approach to everything she designs.

Send me a message
Or call me on
020 3793 7878

Write us a message

We look forward to learning how we can help you. Simply fill in the form below and someone on our team will respond to you at the earliest opportunity.

Have you considered how much the construction will cost?

Urbanist Architecture is committed to protecting your privacy, and we'll only use your information to deliver the services you requested. For more information, please review our privacy policy.

Some fields are incorrect.

Read next

The latest news, updates and expert views for ambitious, high-achieving and purpose-driven homeowners and property entrepreneurs.

Read next

The latest news, updates and expert views for ambitious, high-achieving and purpose-driven homeowners and property entrepreneurs.

Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Developing small sites: Key steps to successful design and planning permission
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Your 13-point checklist to buying off-plan properties as an investment
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
London architects list top 10: The best architects in London
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
How to get planning permission to convert a bingo hall into residential accommodation
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Barn conversions: Planning & Class Q permitted development rights [2024 update]
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Agile construction management for London's unique construction hurdles
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
The proven 6-step system to getting planning permission with ease
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Four common reasons for HMO planning application refusal
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Creating the perfect home office: Amazing home office design ideas
Read more
Image cover for the article: Upward view clear blue and skies and of two tall flatted developments meeting london plan space standards as well as having green balconies
Decoding 13 Green Belt very special circumstances
Read more

Ready to unlock the potential of your project?

We specialise in crafting creative design and planning strategies to unlock the hidden potential of developments, secure planning permission and deliver imaginative projects on tricky sites

Write us a message
Decorative image of an architect working
Call Message